How to effectively prevent the filter element from being sucked flat in the work? If the filter element is not used properly or the filter element is not selected properly, the filter element will be sucked flat in the work. Then how can we effectively avoid it. We summarize several possible reasons for the above:


1. The filter element is blocked and has not been replaced in time. The filter element is seriously blocked by pollutants and not cleaned in time, which leads to the increase of differential pressure of the filter element and the insufficient strength of the filter element, leading to the absorption of the filter element


2. Improper selection of filter element, unsuitable for the current working environment when selecting filter element, too high precision of filter element, or the pressure exceeds its allowable working pressure, will also lead to the phenomenon of filter element flattening. Many customers think that selecting stainless steel sintered mesh filter element and sintered felt filter element will avoid this situation, but it is not the case. Although these two types of stainless steel filter elements have their own compressive capacity, they will also appear flattening phenomenon if they exceed their own compressive capacity. We need to make appropriate adjustments according to the working pressure, such as adding framework, so the effect will be better


3. In case of improper installation, the filter element shall be installed accurately and stably, and the filtering work shall be started before the filter element is fixed, so that the filter element is damaged.